Electronics

SRBP boards, 100 x 160mm with indidvidual round copper pads on one side.

Hole spacing 2.54 x 2.54 (0.1"), 38 holes x 61 holes

NO LONGER AVAILABLE
SRBP boards, 100 x 160mm with rectangular pads covering three holes at a time. Hole spacing 2.54 x 2.54 (o.1"), 39 strips x 20 (3 hole pads).

Tripad prototype board
38 rows each with 8 three-hole, 1 two-hole and one edge connector pad.
Pitch: 0.1"
Size: 100 x 80 x 1.5mm
Board material: Epoxy

Etch your own circuit design. Single Sided SRBP. Pack of 3 boards 100 x 160mm. Pack of 3.

Self Adhesive tape to make conducting tracks on the above boards or for many other uses. 5mm wide x 50 metres long

For simple cutting of the tracks on stripboard. Simply position and twist by hand.

WireGlue uses micro-carbon technology to give you a highly conductive adhesive. It is lead-free and requires no heat. Simply apply the glue straight from the pot with a small brush or even a tooth-pick for those tiny jobs and leave to cure overnight. You make an electrical connection at the same time as mechanically bonding the components together. Wire Glue is suitable for low-voltage, low current connections

With Wire Glue you can easily make connections to aluminium, stainless steel and other metals which are difficult to solder.

Features
*Lasts for ages in the pot.
* Lead Free
* Simple: One Easy Step
* Reliable: Permanent Bond
* Highly Conductive
* For Both AC and DC Circuits
* Quick and Easy Repairs

Applications
* Surface Mount
* Computer Repair
* Battery Connections
* Connector Repair
* Solar Cell Leads
* RF Shielding

Contents: 1 x 9ml pot

Note: Wire Glue is suitable for low voltage, low current connections. The resistance of the joint will depend on the thickness and the area of the connection. The best results will be obtained if there is direct metal to metal contact between the connections.

Solar panel. 60 x 100mm glass panel with 60mm flying leads. Unmounted. Output 3V.

Black Anodised Finned Heatsink, 33x23x19mm high.

TO5, approximately 12mm diameter x 6.5 high.

Heatsink. Simple folded heatsink, 22 x 25 x 25mm approximately.

Heatsink. Folded, finned heatsink, 46 x 25 x 27mm high.

Heatsink with large fins. 25mm long x 19mm wide x 20mm high.

Heatsink drilled for T03. 46 x 46x 32 6o C/W.

Heatsink drilled for TO3 80 x 80 x 25mm.

Heatsink drilled for T03. 45 x 45 x 32mm.

Heatsink for T05 type transistor, 20mm dia, 8mm high.

TO3 heatsink, 45 x 45 x 20mm 71 deg C/W.

Folded heatsink, 17mm wide x 35mm long x 13mm high.

TO3 type heatsink, black, 64mm square x 22mm high, approximately 5'C/W.

TO3 type heatsink, black anodised, diamond shaped, 35 x 52 x 50mm high with mounting lug.

Heatsink 35mm, height 25mm depth 13mm. Marked sw25.2. With clips for stacking one on top of another.

The SP0256-AL2 produces all 59 phonemes of the English language plus 5 pauses of different lengths. Each of the phonemes are individually addressable which makes the SP0256 capable of saying anything which can be said in the English language. This is the easiest approach to univeral speech synthesis and the speech quality is that of a good robot voice. Search the net and you will find loads of reference to the use of this chip in robots, with masses of circuit ideas and chip specification.