Test & Measure

Turn your PC into a datalogger.
This professional multimeter has a very comprehensive range of functions covering Current, Voltage, Resistance, Capacitance, Frequency and Temperature. It also has a RS232 connection to your PC and comes complete with software so you can use it as a data logger and record your readings over time for later analysis.

Specification
DCV: 400mV - 600V
ACV: 4V- 600V
DCA: 40mA - 10A
ACA: 40mA - 10A
Resistance: 400 Ohms - 40MOhms
Capacitance: 40nF - 100uF
Frequency: 10Hz - 100MHz

Other features include Diode Test, Audible Continuity Test, Relative Measurement mode, Auto-ranging or Manual setting, Low battery display, Auto Power Off.
Battery: 2 x AA
Weight: 500g
Dimensions: 145 x 73 x 45mm
PC connection: 9 pin RS232

Luxmeter measuring 0 to 50,000 lux over 3 measurement ranges. Clear 4-digit LCD display. Separate sensor with diffusion lens. Complete with protective holster.
Battery 9V, PP3 (not included)
Dimensions 109 x 72 x 24mm
Accuracy +/- 5%
Resolution 1 LUX
Overload Display 1

This versatile meter will measure sound levels in just about any environment. Ideal for factories, schools and airports as well as domestic applications such as studios or home cinema installations, etc. Powered by a 9V PP3 battery (included) the unit is completely portable and easy to use.
7 sound level ranges from 50db to 126 db
2 frequency weightings
Fast and slow response settings
Battery condition monitor
Phono output for connection to test equipment
Tripod bush

Got a box of components you can't identitfy? Can't lay your hands on the data sheet you need? Forgotten the pin-outs? The Atlas is a new generation of intelligent component analyser which brings a world of component data to your fingertips. Just connect the three colour coded test leads and press the button.

The Atlas features:
Automatic component identification of: Bipolar and Darlington transistors, Enhancement and Depletion Mode MOSFETs, Junction FETs Triacs and Thyristors, Standard and Bicolour LEDs, Diodes and Diode networks.
Automatic pinout identification for all the above component types.
Special feature identification such as diode protection and resistor shunts.
Gain measurement for transistors.
Gate threshold measurement for Enhancement Mode MOSFETs.
Semiconductor forward voltage measurements for diodes, LEDs and transistors.
Semiconductor test current measurement.

The Atlas analyser will save you hours of wasted time. Just what the well equipped workshop needs.

Click here for user manual (111k) http://www.sciencestore.co.uk/atlas.pdf

The Atlas LCR is an advanced instrument that greatly simplifies the testing of passive components. Traditional LCR bridges are inherently complex and very time consuming to use. The atlas LCR automatically identifies the type of conponent (Indicator, Capacitor or Resistor) as well as it's value together with further conponent data. Such as the DC resistance of an indicator. Just clip the universal test leads to your conponent and press the test button. It automatically selects the best signal level and frequency for the test conponent. Ranges 1uH to 10H, 1pF to 10.000uF, 1R to 2MR. Basic accuracy is 1 %. Universal test probes are detachable allowing use of many different probe types including SMT tweezer probes.

Click here for information sheet (586k) http://www.sciencestore.co.uk/atlasLCR.pdf

Specifically for use with the Atlas LCR Passive Component Analyser (TG0002) The gold tipped probes are ideal for testing discrete, loose, surface mount devices from 0402 package sizes and upwards. The probes are terminated with the Atkas LCR plugs, allowing simple and rapid connection to the LCR. The tweezers are supplied complete with a beautiful stainless steel Peak Dog-Tag for probe compensation purposes. Full instructions are included.

These crocodile clips have been specifically assembled for use with the Atlas LCR Passive Component Analyser (TG0002). The stainless plated crocs can be separated by up to 120mm. The jaws of each clip can be opened to 6mm. The overall assembly length is 95mm. The probes are terminated with gold plated Atkas LCR Plugs, allowing for simple connection to your analyser. Full instructions are provided.

These Grabbers are for use with the Atlas LCR Passive Component Analyser (TG0002). The overall length is 58mm (2 1/4"). Each double-electrode grabber is capable of holding on to any conductor diameter up to 1.8mm. The probes are designed to mate with the LCR sockets. Full instructions are provided.